| Slide
and Film Projectors
Omnigraphic
253AF RAS
Random
access slide projector
A
fully computerized circuit allows random selection of a desired
slide in a tray. Simply by pushing relevant numeral keys on the
remote keyboard (optional), any slide in the tray will
automatically be accessed in approx. three seconds.
|
| |
| Control
through the RS-232C interface |
Reset
to zero position
FWD/REV slide transport
After/Before FOCUS
Lamp On/Off
Frame number set
Take-In/Out
Check of present frame number
Check of ROM version
Douser Open/Close
Interval projection (1~99 sec.)
(Signal condition)
(1200BPS/8bit/No
|
| Control
unit |
Built-in
|
| Dimensions
(w/o lens and tray) |
284x292x126mm
(11.2x11.5x5.0 in.)
|
| Elevation
|
Up
to 8
|
| Fan
motor |
Auto
control possible
|
| Focusing |
Manual
plus keyboard
Autofocus also possible
|
| Keyboard
(optional) |
Indicator
panel for display of slide number
FOCUS button
ON/OFF button to switch the projector lamp on/off
CE button to cancel the last digit selected
START button to activate seek run
RESET button to return the keyboard control and the projector to
|
| Lamp
indicator |
Built-in
|
| Light
condensing system |
One
each of Spherical condenser lens. Heat-absorbing condenser lens,
Aspherical condenser lens and Reflection mirror
|
| Motors |
Two
drive motors, two focus motors and one fan motor
|
| Power
consumption |
330W
|
| Power
source |
AC
single phase 50 or 60Hz
|
| Projection
lamp |
24V-250W
ANSI code EHJ
|
| Projection
lens |
ELMO
rack-focus/spiral-focus lenses - plus most other
rack-focus/spiral-focus lenses compatible with Kodak Ektagraphic/Carousel
series projectors
|
| Quick
lamp change |
Built-in
|
| Safety
thermal cut-off switch |
Built-in
|
| Slide
size |
2x2
mount slide (max. recommended image size 23x35 mm)
|
| Slide
transport |
Forward,
Reverse and Zero return
|
| Slide
tray |
80
slide capacity circular tray (Kodak SAV2000 tray recommended)
|
| Slide
zero position indicator |
Built-in
Built-in
|
| Tie-down
points |
Two
threaded sockets for 6.35mm (1.4")x20-thread bolt are
provided.
|
| Weight
(w/o lens & tray) |
Approx.
9 kgs (20 lbs)
|
|
^ GO
TO TOP
|
