Advantage Manual With CSR
When Ordering Make Appropriate Selections:
1. Select size:
2. Select Viewing Surface
3. Options
-
Black "Extra Drop" to lower
picture area more than normal. Maximum total
drop 13' including picture area.
-
White "Extra Drop" to lower
picture area more than normal. Maximum total
drop 13' including picture area.
-
No Borders (Black masking borders are
standard).
-
Pull Rod.
4. Suggested Specifications
__________ projection screens, __________ (H) x
__________ (W), wall or ceiling mounting type.
To have Glass Beaded, Video SpectraTMTM
1.5, High Power or Matte White surface with
masking borders standard on flame retardant and
mildew resistant fiberglass fabric, mounted on
3" diameter ball bearing rigid steel spring
roller. To be equipped with Controlled Screen
Return (CSR) to control the return speed of the
screen surface back into the case. Fabric to be
permanently attached to roller by metal clips on
fabric edge being forced into groove in roller.
There shall be a clip every 3" along the
fabric edge and double clips shall be used on
the ends. Top, front and back of case to be made
of extruded aluminum. End caps to be of heavy
gauge steel with provisions for attaching
mounting hardware. Bottom of case to have a
removable access door. Entire case to be painted
white. Bottom of case to be self-trimming, with
a built-in flange around the bottom of the case.
Bottom of screen shall be formed into pocket
holding tubular metal slat. An extruded aluminum
saddle with plated steel pull shall be attached
to the slat by four screws on each end. The ends
of the slat shall be protected by heavy-duty
plastic caps. Metal bumper stops padded with
sponge rubber, shall be built into case to
prevent slat wedging inside case. Roller
mounting brackets to be adjusted to allow
centering or offsetting the screen within the
case.
Matte White : Horizontal seams required when
both dimensions exceed 10'.
Glass Beaded: Horizontal seams required when
both dimensions exceed 8'.
Video SpectraTMTM 1.5 and High Power:
Available in sizes up to and including 9 feet by
12 feet. Horizontal seams required when both
dimensions exceed 6 feet.
|