Home

Rentals

Sales

Computers

Consulting

What's New

Press Releases

Road Map

Email

 
mfi_head_ph.gif (13126 bytes)
 
mfi_dev.gif (2646 bytes)
 
SANYO


SANYO




CONNECTING THE PROJECTOR

TERMINALS OF THE PROJECTOR

1. S-VIDEO INPUT JACK
Connect the S-Video output from the video equipment to this terminal.
2. AUDIO INPUT JACKS
Connect the audio outputs from video equipment to these terminals. When the audio output is monaural, connect it to the left jack.
3. COMPUTER INPUT TERMINAL
Connect the computer output to this terminal.
4. MONITOR OUTPUT TERMINAL
This terminal outputs the signal from the COMPUTER IN terminal. Connect to the monitor to this terminal.
5. CONTROL PORT CONNECTOR
When controlling the computer with the Remote Control of this projector, connect the mouse port of your personal computer to this terminal. It is also used for write on or read from the data of the PC CARD SLOT in the MCI mode.
6. AUDIO OUTPUT JACK (STEREO)
Connect the audio amplifier to this terminal.
7. COMPUTER AUDIO INPUT JACK
Connect the audio output from the computer to this terminal.
8. VIDEO INPUT JACK
Connect the video output from the video equipment to this terminal.

 

COMPUTER INPUT/MONITOR OUTPUT TERMINAL
Terminal: HDB 15-PIN

Connect the display output terminal of the computer to COMPUTER INPUT with the VGA Cable (supplied). And connect the monitor to MONITOR OUTPUT with the monitor cable (not supplied). When connecting the Macintosh computer, the MAC/VGA adapter (not supplied) is required.

 

 

 


CONTROL PORT CONNECTOR
Terminal: DIN 8-PIN

Connect control port (PS/2, Serial or ADB port) on your computer to this terminal with the Control Cable for the PS/2 port is supplied)

 



 

 



 

  

 
Home . Rentals . Sales . Computers . Consulting
What's New . Press Releases . Road Map . Email
 
Copyright© 1999, Media Fabricators, Inc.  Send comments to: [email protected]
Press Releases