Home

Rentals

Sales

Computers

Consulting

What's New

Press Releases

Road Map

Email

 
mfi_head_ph.gif (13126 bytes)
 
mfi_dev.gif (2646 bytes)
 
SANYO


SANYO




SETTING UP THE PROJECTOR: PLC9000NA/NL
POSITIONING
  This projector is basically designed to project on a flat projection surface.
  This projector can be focused from 3.6' (1.1m) - 73.2' (22.3m).
  Refer to the figure below as an example when positioning the projector to the screen.

THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG THE
PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE HAZARD


ROOM LIGHT
The projector should be placed in a room with limited light. Picture quality will
be directly affected by lighting conditions.

PLC-9000 SETUP

Screen Size Max. Zoom 30" 100" 150" 200" 300" 400" 600"
Screen Size Min. Zoom --- 62" 94" 125" 188" 250" 375"
Distance 3.6'
(1.1m)
11.8'
(3.6m)
17.7'
(5.4m)
24.3'
(7.4m)
36.4'
(11.1m)
48.6'
(14.8m)
73.2'
(22.3m
)


LEVELING/ELEVATION FEET



LEVELING AND ELEVATING ADJUSTMENTS
Two feet adjust the projection angle and
leveling of the projector. The projection
angle can be adjusted up to 4 degrees by
rotating the two (left and right) feet located
on the bottom of the projector.
Level the projector by rotating the two feet.




MOVE THE PROJECTED IMAGE POSITION
Adjust the projected image position
(maximum 760mm downward or upward
on the 100" screen) by using lens
shift function.

 



 

  

 
Home . Rentals . Sales . Computers . Consulting
What's New . Press Releases . Road Map . Email
 
Copyright© 1999, Media Fabricators, Inc.  Send comments to: [email protected]
Press Releases