|
SELECT |
|
|
|
:: FAQ
|
|
|
|
:: Instruction Manual
|
|
|
::
PDF Sheet |
|
|
|
::
Typical Installation
|
| |
|
|
| |
|
|
|
|
|
|
|
|
 AUDIO/VIDEO DISTRIBUTION AMPLIFIER
|
 |
This simple, little video
and audio DA will send your composite video with stereo
audio or S-Video to four different places at once. |
Unit Dimensions/Weight
Width: 804 inches, 210 mm,
Depth: 8.4 inches, 210 mm
Height: 2.2 inches, 55 mm
|
KEY FEATURES
|
|
Self
contained - stand alone design compatible with VHS,
VHS-C, S-VHS, S-VHS-C Video 8, Hi 8 and Ditial 8
format
NTSC or PAL format
Wide bandwidth - Video > 5.5MHz,
Audio 20 to 20KHz +/- 3dB
Low noise, S/N ratio video > 50dB, Audio > 75dB
Audio THD < 0.03% |
|
SPECIFICATIONS
|
|
Inputs
Y/C Video (S-Video) 4-pin 75 ohm
DIN Connector (1)
Composite video 75 ohm RCA connector, Level: 1.0
VP-P (1)
Stereo audio RCA connectors, impedance: 100K ohm
Outputs
Y/C Video (S-Video) 4-pin
75 ohm DIN connector (4)
Composite video 75 ohm
RCA connector, Llevel: 1.0 VP - P/Unity (4).
Stereo audio RCA connectors, Impedance: 1K ohm,
Level: unity (4).
General
Frequency Response--> S-Video 5.5
MHz +/- 3dB
S/N Ratio--> >50dB
Output Level--> Unity +/- 0.5dB
Power Requirement--> DC 12V 500 milliamps
Ambient Temp. Range --> 32°-13°F (0°-55°C)
Ambient Humidity--> < 90%
Audio
B/W --> 20-20 KHz +/- 3dB
THD--> 0.03%
S/N Ratio--> 75dB
Output Level--> Unity +/- 1dB
Accessories
Y/C S-Video (2)
Composite (RCA) Cables (2)
DC 12V 500mA power adapter (110 supply)
|
|
|
|
|
